Shoppers Unforgiving of Return Restrictions

Blue Yonder has just released its 2026 Consumer Retail Returns Survey. It found that 89% of UK shoppers would shop less often or stop shopping entirely at a retailer that limited their ability to return items because they returned too frequently – the highest proportion across the five markets surveyed.

The survey polled more than 5,000 consumers across the UK, US, Australia, France and Germany, including 1,001 UK consumers. It asked how they shop, what they send back and how they respond when retailers tighten the rules. It found that UK consumers are highly resistant to return fees and remain sceptical of AI’s ability to recommend the right size or fit.

Key findings:

  • 35% of UK consumers have stopped shopping at a retailer that implemented a stricter returns policy in the past year, while 52% have chosen one retailer over another purely because it offered a better policy.
  • 25% of UK consumers make a return at least monthly, around half the proportion in France (48%) and Germany (46%).
  • Only 17% would trust AI to recommend the right size or fit, while 37% would not trust it at all – the highest proportion across the five markets surveyed.
  • Of the 23% of UK consumers who have purchased a product after receiving an AI recommendation, 41% have returned one in the past year.

Gen Z Drops Retailers Over Stricter Policies, but Boomers Walk When Flagged as Frequent Returners

Over half of UK respondents (52%) said that they have decided to buy from one retailer over another purely because it had a better returns policy. More than one-third (35%) have gone further and stopped shopping altogether at a retailer that implemented a stricter returns policy in the past year. Gen Z (52%) and Millennials (45%) were more likely to have stopped shopping with a retailer after it tightened its policy, compared with Gen X (31%) and Baby Boomers (19%).

The gap partly reflects how often each generation returns purchases. Thirty-seven percent of Gen Z and Millennials return a purchase at least once a month, compared with 12% of Baby Boomers, so a stricter policy affects them more often. The pattern flips when a retailer singles shoppers out. If a retailer told them they return too often and limited their returns, 62% of Baby Boomers would stop shopping there entirely, compared with 39% of Gen Z.

Despite reacting most strongly to return restrictions, UK consumers return products far less frequently than those in the other European markets surveyed. Only 25% make a return at least once a month – roughly half the proportions in France (48%) and Germany (46%), and just 14% had a return rejected during the past year, compared with 32% in France and 30% in Germany.

Retailers are adopting new tracking technologies, such as using AI to monitor return histories and flag frequent returners. When asked about the practice, 36% of UK respondents called it a fair way to control costs and 19% said it would not affect their shopping. However, 22% said it is invasive and would make them shop elsewhere.

“The instinct when returns go up is to tighten the rules,” said Duncan Angove, CEO of Blue Yonder.

“But the data tells you how that ends. Flag shoppers as frequent returners and limit their returns, and nearly nine in 10 say they’d cut back or walk away. And some of your most frequent returners are your best customers. The challenge is telling the difference between a shopper who abuses returns and a loyal customer who simply returns a lot. That takes systems that can set the right policy for each customer and handle every return as quickly and cheaply as possible. Done right, returns stop being just a cost and instead start earning loyalty.”

AI Recommendations Fuel UK Consumer Returns

Nearly a quarter (23%) of UK respondents said they have purchased a product after receiving a recommendation from an AI tool or assistant, such as a consumer chatbot. Of those, 41% have returned an AI-recommended purchase within the past year. Among UK shoppers who returned an AI-recommended purchase, the most common reasons were that it was different from its description (37%) and an incorrect size or fit (26%).

Younger consumers are more likely to shop with AI. More than a third of Gen Z (37%) and two in five Millennials (42%) have purchased a product after receiving an AI recommendation, compared with 13% of Gen X and 5% of Baby Boomers. More than half of Gen Z AI shoppers (56%) have returned an AI-recommended item in the past year. Trust also wanes with age. While 17% of all UK respondents would trust AI to recommend the right size or fit, that ranges from 25% of Gen Z to just 6% of Baby Boomers.

“Shoppers are taking AI’s advice faster than retailers are getting ready for it, and nearly half of them are sending something back,” added Angove. “That’s not really an AI problem. It’s a data problem. An AI assistant is only as good as the product information it can find, and most product data was written for a search bar, not for a machine suggesting products for someone. When what arrives doesn’t match what the shopper expected, it goes back in the box.”

Consumers Want Free and Easy Returns, but Accept Alternatives

Free and fast returns matter most to UK shoppers. For 43%, free returns shipping is the most important factor when returning an item, followed by fast or instant refunds (29%). If presented with a fee to return a product, 59% of UK respondents said they would not be willing to pay. Resistance increases with age, ranging from 38% of Gen Z and 49% of Millennials to 69% of Gen X and 70% of Baby Boomers.

Consumers are also accepting ‘keep it’ returns and alternative incentives in exchange for not making a return. Nearly three in five (58%) UK respondents have been told by a retailer to keep a product they wanted to return in the past year, up from 50% in 2025, with 67% of those saying it made them more likely to shop with that retailer again. For retailers, a keep-it refund can make economic sense when the cost of shipping and processing a return exceeds what the item could be resold for, provided they can identify shoppers who might take advantage of it.

Respondents would also accept a discount or partial refund (31%), store credit for a future purchase (30%), or a discount on a future purchase (27%), while 31% would not accept any offer in exchange for not making a return. More than half (56%) are concerned about the environmental impact of returned products ending up in landfill. Among this group, 30% would prefer to resell the product themselves and 23% would donate it to charity.

Energetic Reputation

How does a major materials handling supplier maintain brand loyalty and continue to grow its products and sales? David Priestman visited Jungheinrich UK’s ‘solutions showcase’ open day in Warrington, UK to see new its warehouse trucks and understand the company’s gambit.

Despite the advance of warehouse automation systems and robotics, demand for traditional forklifts, reach trucks, VNA trucks and pedestrian warehouse vehicles remains robust. Retail warehouses and third party logistics operators are still the biggest users. Increasingly these fleets are electric, with Jungheinrich’s sales split fairly evenly between lithium-ion and lead acid battery power.

Safety First

“Safety should never be viewed as a cost, but as an investment,” UKMHA’s Rob Fisher told the audience. There are still, remarkably, 1500 serious injuries from forklift accidents every year in Britain, despite stringent legislation and full accident investigations. Are they all preventable? Good driving should be rewarded, Fisher says, allied with the usage of product and warehouse equipment such as pedestrian detection, speed control, cameras, access control, impact monitoring, rack protection and truck telematics.

The new EFG 2 and 3 series electric counterbalanced forklifts are the ‘bread and butter’ of Jungheinrich’s expansive fleet. Featuring a patented super-thin A-frame these trucks offer enhanced levels of visibility. Ergonomic advances are at the fore too, with additional leg room and an adjustable steering column that, impressively, can be moved up, down, in and out by the operator, as can the arm rest.

The display screen on the EFG is now at eye level and the 12mm polycarbonate roof option is both extremely strong and largely transparent, permitting the driver to look up and have more light in the cab overall. Automatic fork levelling keeps the mast in a 100% vertical position, dependant on the truck itself, which might not always be on a flat surface and could be on a slope. The rear camera distinguishes people from solid objects and then switches the forklift to a ‘red zone’ slow mode.

Transition to Electric

Electrification is a strategic, corporate decision these days but getting enough power to a distribution centre site is not always guaranteed. Luke Gardner has an unusual job title for a materials handling company – Energy Infrastructure Manager. He’s leading a new, separate energy department of consultants to support customers with an end-to-end process, whether that be on greenfield or brownfield sites. “If you spoke to someone a few years ago about energy they’d be talking about what battery that they wanted (full li-ion or not), but now it’s about having the right power at the right time,” says Tim Marriott, National Sales Director. “A lot of the time my sales team will start off discussing a solution and then decide they need to talk to the power expert, so it’s important to bring them in at the start.”

Every warehouse has a set power level that comes in and that is controlled by the grid. “We break its usage down according to EV charging (cars and CVs), lighting, offices etc and then calculate what electricity demand will come from the materials handling equipment (MHE). We have to make sure we get the power we need and get in there early,” Gardner tells me. That demand could be for a three-shift 24/7 operation or a two-shift, 5-day set-up and Gardner’s role is to simulate operations, dive deep into data and carefully consider what is feasible. A strong reputation for finding energy efficiencies can help secure contract wins, he states.

The Right Charger

Charging does not always have to be superfast. “There’s a lot of fearmongering out there about how much power lithium-ion needs,” Gardner says. “There’s no need for maximum charge as getting through the shift or to a break is sufficient. There’s usually a shift break, for team briefings for example, which creates a window for charging.” Very rarely are all machines on charge.

I asked him what proportion of total power usage in the DC can be taken for the MHE. “It depends on the size, but could be 50 or 60%,” is the surprising answer. “When handing-over a new system we manage the energy consumption and save power by changing shift patterns and determining the best battery and charging combination and infrastructure to use. It’s important to choose the right charger because that’s what pulls the most power,” Gardner informs me. This active load management or energy management system talks to the chargers and sets safe limits. It can vary charger levels, turn down the power and collaborate with the DC’s solar power system. His team are also exploring energy storage off the grid as the costs of those batteries have dropped. The sun’s rays during the day could power automation at night.

What we are hearing from customers is that the pressure to do more with less isn’t going away. Businesses are looking at how they can improve productivity, make better use of space and strengthen safety, while keeping a close eye on costs. For us, it is about understanding the challenges our customers face and working with them to find the right approach for their operations

Stephen Saunders, Managing Director of Jungheinrich UK & Ireland

Speedy Lifting

Jungheinrich built its first reach truck in 1956. Seventy years on the new ETV series has been launched, with 2i, 3i and 4i versions that come with lead acid or lithium-ion power. There is also an integrated pure li-ion option, made without using any derivative products, which comes in a more compact chassis, with the same lift height and a narrower turning circle.

With an 8.6m maximum lift height the ETV is fast in raising its forks, with a lifting speed of 1.2 m/s. Such speed raises productivity as more pallets can be picked per hour. The low stepping-on height of the new ETV2i, a mere 42cm, is ideal for operators that hop on and off the reach truck during shifts, whether that be to add labels, remove shrink-wrap or other quick checks. Being able to slide in without a step up creates more room in the cab.

Experience Matters

Karen Taylor-Ronson is National Customer Services Director at Jungheinrich UK & Ireland. She has been with the business for twenty-six years. Responsible for leading customer service operations, her focus is in delivering exceptional customer experiences and building long-term customer partnerships. Her long tenure is testament to this dedicated approach. “Brand loyalty is probably bigger now than when I joined the company,” she tells me, estimating that 80% of turnover is from recurring business and renewals. “We do a very good job with our customers when they’re in the initial contract stage. A lot of the loyalty comes from our service.” Most (60%) truck contracts are a 5-7 year lease or 12-month CAPEX purchase agreements. Major customers are too numerous to mention.

Jungheinrich’s approach utilises customer relationship surveys and transactional surveys, plus area sales manager feedback to provide KPIs in a dashboard for review. “We have a global initiative called CARE, which is our customer centricity platform. We monitor it closely,” Taylor-Ronson adds. Every time an engineer makes a visit a survey is sent out. “The transactional surveys give us more feedback as tickets can be raised and routed to the relevant person.” Unsurprisingly it’s the very good or sometimes bad experience that gets reported most, both from corporate and smaller customers. The objective is for day-to-day consistency at a high level.

Selling across such an extensive product portfolio provides opportunities to grow and satisfy customer needs. “That’s everybody’s objective, selling add-ons that give the right solution, including safety and fleet management systems (FMS).” FMS provides safety and usage information to managers. Remote diagnostics are a useful recent addition to the service. “We know when your truck has a problem and needs servicing before the customer does.” Automation customers are understandably more likely to buy WMS from Jungheinrich than those just buying forklifts and other trucks. “Every day is an opportunity to give the customer a better experience with us, and we know which customers are coming up for renewal next year,” Taylor-Ronson concludes.

Subscribe

Get notified about New Episodes of our Podcast, New Magazine Issues and stay updated with our Weekly Newsletter.