Linde Supply Truck Combines Forklift and Train Benefits

The Trolley Supply Truck is a new vehicle concept from Linde Material Handling that the company claims combines all the advantages of a Linde logistics train with those of a forklift. The design is based on Linde’s matrix concept: both the goods transporter’s control unit and drive unit come from the modular system for Linde warehouse equipment. What is completely new, according to Linde, is the load unit which takes the form of a bar trolley with steered wheels. It allows efficiency increases of up to 30 percent to be achieved in material transport to production plants.

“Many of our customers have already implemented forklift truck-free production supply via tugger or logistics trains,” explains Ralf Knaut, Project Manager Special Solutions at Linde Material Handling. This is because trains consisting of tow tractors and trailers are often superior to forklifts, especially in purely horizontal goods transport. They are loaded and unloaded from the side and therefore require less space than a forklift truck which is at right angles to the carriageway when setting a pallet down. In addition, the tugger trains can transport a larger amount of material to the assembly lines per journey. Both of these factors result in a lower volume of disruptive traffic, a lower risk of accidents and lower costs alongside higher productivity.

“However, existing factory layouts cannot always be adapted to the requirements of tugger train solutions without constraints,” Knaut points out. In many existing plants, the source or destination are located at dead ends and are therefore not accessible for tugger trains that can only drive forwards with their trailers. This is where the Trolley Supply Truck comes into play. It complements the Linde logistics train and thus ensures further optimization on short and medium distances. “This makes it another piece in the process standardization mosaic and leads to more efficient intralogistics overall,” adds Markus Schmermund, Vice President Product Management Automation & Intralogistics, Linde Material Handling.

Four metres long, 1.28 metres wide and 2.36 metres high, the Trolley Supply Truck is extremely compact and requires a carriageway width of merely 1.88 metres, including a safety clearance of 30 centimetres. If the route includes curves, a 2.30-meter-wide carriageway is sufficient for the load transporter to turn at right angles. The electrically steered wheels at both the front and rear ensure great directional stability both on straight stretches and in bends. The U-shaped load support is designed for a wide variety of goods carriers. For example, two standard Euro pallets or one double Euro pallet as well as other goods carriers such as trolleys measuring between 800 and 1600 x 1200 millimetres can be transported.